Tolerance control
Typical tolerances to +/-0.1 mm, with +/-0.005 mm available when conditions allow.
Custom CNC Parts
Custom CNC Machined Parts
Precision metal and plastic parts made to your drawings, with tolerances down to +/-0.005 mm, in-house finishing and support from one-off prototypes to mass production.
300,000
Parts per month
+/-0.005 mm
Tolerance capability
50+
Finishing options
1 pc-mass
Production volume
Machining route
By Machining Process
Select a process based on geometry, feature access and tolerance requirements.
CNC Milling Parts
Multi-axis housings, brackets and cavities for complex, high-precision geometry.
Explore category
CNC Turning Parts
Shafts, sleeves and threaded parts requiring concentricity and smooth rotational surfaces.
Explore category
Turn-Mill Machined Parts
Complex rotational parts completed in one setup to reduce clamping and positional error.
Explore categorySwiss-Machined Parts
Miniature pins and slender shafts produced with stable guide-bushing support.
Explore category
EDM Parts
Deep cavities, sharp internal corners and hard conductive materials beyond conventional tool access.
Explore categoryWire-Cut EDM Parts
Precision slots and irregular contours with narrow kerfs and minimal cutting force.
Explore categoryRaw material
By Material
Compare materials by strength, weight, conductivity and environmental resistance.
Aluminum Alloy Parts
Lightweight parts for housings, frames and thermal-management structures.
Explore category
Stainless Steel Parts
Corrosion-resistant, high-strength parts for demanding operating environments.
Explore categoryCarbon & Alloy Steel Parts
Rigid, wear-resistant parts for transmissions, tooling and fixtures.
Explore category
Copper & Brass Parts
Conductive parts for electrical connections and thermal systems.
Explore category
Engineering Plastic Parts
Lightweight, insulating parts for non-conductive and corrosion-resistant applications.
Explore category
Magnesium Alloy Parts
Ultra-light parts with high specific strength for aerospace and portable equipment.
Explore categoryFinal surface
By Surface Finish
Choose a finish for corrosion protection, wear, conductivity, color or texture.
Anodized Aluminum Parts
Colored, wear-resistant aluminum parts with a controlled protective oxide layer.
Explore categoryPassivated Stainless Steel Parts
Clean stainless-steel surfaces with improved corrosion resistance and stability.
Explore categoryGold-Plated Parts
Low-resistance, oxidation-resistant parts for precision electrical contacts.
Explore categoryNickel-Plated Parts
Hard, smooth coatings for corrosion protection, wear resistance and appearance.
Explore category
Sandblasted Parts
Uniform matte surfaces that reduce tool marks and improve coating adhesion.
Explore categoryPolished Parts
Brushed or mirror finishes with scratches and burrs removed.
Explore categoryManufacturing evidence
Manufacturing Capabilities
Machining, finishing, production and inspection support for drawing-based parts.
Materials & finishes
Metals, engineering plastics and more than 50 finishing options.
Production volume
One-off prototypes through large-volume production.
Integrated finishing
In-house finishing for tighter quality and lead-time control.
Inspection documents
Dimensional, roughness and appearance reports available on request.
Production equipment
Controlled machining processes for repeatable batch quality.
Industries
Industry Applications
Explore precision part solutions by operating environment, assembly risk and industry-specific quality requirements.
Industries01
Automation & Robotics
Structural and motion-control parts for automated equipment and robotic assemblies.
Explore categoryIndustries02
Aerospace
Lightweight, high-strength parts for aerospace systems.
Explore categoryIndustries03
Medical Devices
Precision components for diagnostic and medical equipment.
Explore categoryIndustries04
Optical Instruments
Tight-tolerance housings, mounts and mechanical optical components.
Explore categoryIndustries05
Electronic Hardware
Conductive, insulating and enclosure parts for electronic systems.
Explore categoryIndustries06
Industrial Equipment
Durable components for machinery, fixtures and production equipment.
Explore categoryProduct support
Custom CNC Parts FAQ
Drawings, tolerances, finishing, inspection and lead-time information.
Can you provide customized surface finishes?
Yes. We own an independent surface finishing factory providing more than 50 treatments such as anodizing, phosphating, micro-arc oxidation and electroplating.
What file formats are acceptable for customization?
We support STEP, IGES, STL, DXF, DWG and PDF engineering drawings.
Do you support small batch prototypes?
Yes. Low MOQ is available, from one-piece prototypes through large-volume batch production.
What is your strictest machining tolerance?
We can reach +/-0.005 mm for ultra-precision industrial components when geometry, material and inspection conditions allow.
Will you provide inspection reports?
Yes. Dimensional inspection, roughness testing and appearance inspection reports are available upon request.
How long is the delivery time for custom parts?
Prototypes typically take 3-5 days; mass production normally takes 7-15 working days depending on quantity and complexity.
Get Custom CNC Parts Built to Your Drawings
Upload your CAD files for an accurate quote and free DFM feedback.