W01Zero-force Non-contact Cutting
Adopts spark erosion processing without mechanical extrusion force, effectively avoiding structural deformation and tool pressure damage for thin-walled and high-hardness parts.
Резка проволоки
Precision Wire Cut Machining Services | Custom Wire EDM Cutting Parts
?? ????????????? ?????? ???????????? ??????? ?? ????? ? ??? ?? ??????????, ??????? ???????? ? ????????? ?????????, ????????????????? ?????????, ??????????? ????? ? ?????? ????????. ?? ?????????? ???????????? ????????????? ? ??????????? ?????? ? ?? ?????????? ?? ????????? ????????????.
High-precision wire cut EDM services for ultra-narrow slits, sharp corners and complex 2D profiles with zero cutting force and burr-free precision.
Drawing to production
Нам доверяютпартнерам нравится
WIRE / CUT
Service Overview
Programmed through-cut cell
Wire feedXY contour pathThrough profile
Select the wire route
Ultra-precision one-way wire control
Stable one-way wire feeding supports tighter tolerance, finer surface finish and high-end mold or precision component requirements.
W02Ultra-fine Structural Machining
Supports 0.05mm ultra-narrow slits, zero-radius sharp corners and complex closed profiles that cannot be processed by traditional cutting tools.
W03Hard Material Universal Adaptation
Machining quality is not affected by material hardness, capable of processing hardened steel, tungsten steel and various high-strength alloy materials freely.
W04Burr-free & High-precision
Forms smooth cutting edges without burrs, eliminating secondary deburring procedures and improving overall dimensional consistency of parts.
W05Dual Process Coverage
Matches high-speed wire cut for cost-effective batch production and low-speed wire cut for ultra-precision mirror finishing to satisfy diversified precision requirements.
W06Flexible Production Capacity
Supports low-volume prototype trial production and stable large-batch manufacturing to adapt to various custom order demands.
We offer professional custom wire cut EDM machining services, focusing on high-hard metal and complex planar precision component manufacturing. Equipped with high-speed and low-speed wire cut equipment, we deliver one-stop machining solutions from rapid prototyping to large-scale mold and component mass production. Our mature wire cut process ensures burr-free, deformation-free and highly consistent precision parts to meet diverse industrial customization demands.
Wire Cut Machining (Wire EDM) is a non-contact spark erosion precision manufacturing process that adopts continuously moving metal wire as the electrode to cut conductive materials. Different from conventional CNC cutting, it generates no mechanical cutting force and requires no rigid tool contact. It perfectly solves the processing difficulties of ultra-hard metals, ultra-narrow slits, sharp inner corners and complex 2D profiling, delivering zero-burr, zero-deformation and high-repeatability precision for various molds and mechanical precision components.
WIRE / CUT
Our Wire Cut Machining Capabilities
Programmed cutting envelope
High-speed Wire Cut, Low-speed Wire Cut, Multi-cut Finishing, Ultra-narrow Slit Cutting
Tolerance
±0.001mm ~ ±0.005mm
Minimum width
0.05mm
Max thickness
300mm
Roughness
Ra 0.4μm — Ra 1.6μm
Wire remains continuous through the full workpiece thickness
Acceptable Files
STEP, IGES, DXF, DWG, PDF
Lead Time
3–5 days for prototypes, 10–15 days for mass production
WIRE / CUT
Metal Materials
Wire cut EDM machining applies to all conductive metal materials, free from limitations of material hardness and cutting difficulty. It supports conventional steel, non-ferrous metals and ultra-hard mold alloys with stable spark discharge performance and controllable processing effects. The table below sorts out mainstream processable materials, corresponding machining performance and common grades for your reference.
Conductivity enables the programmed spark path
Selected material
Stainless Steel
Features stable spark discharge and uniform cutting texture without thermal deformation, suitable for corrosion-resistant precision molds, fixtures and medical structural parts.
Common grades
303, 304, 316, 420, 440C
TYPICAL / WIRE
Typical Wire Cut Machining Components
The electrode wire must enter and exit through the workpiece
Selected through-cut component
Precision Stamping Mold Parts
Custom high-hardness punches, die blades, inserts and toothed mold components for automated stamping dies with stable and consistent dimensional accuracy.
WIRE / CUT
Surface Finishing for Wire Cut Machining Parts
We provide full in-house surface finishing solutions for custom wire cut parts. Professional post-processing effectively removes wire cut textures and micro spark marks, improving surface smoothness, corrosion resistance and wear resistance while strictly retaining original precision dimensional tolerances.
Preserve the cut profile while improving the exposed surface
Selected post-process
Polishing
Eliminates wire cut textures and micro spark flaws on part surfaces. Brushed and mirror polishing options optimize surface smoothness to meet high-precision assembly and aesthetic standards.
Component families
Industry Application
Our custom high-precision wire cut components are widely used in various high-standard precision manufacturing industries worldwide
Selected component family
Precision Stamping Mold Parts
Custom high-hardness punches, die blades, inserts and toothed mold components for automated stamping dies with stable and consistent dimensional accuracy.
Select an industry scenario to review the matching application context.
Discuss a Wire Cut Application
WIRE / CUT
Wire Cut Machining Design Guidelines
Active engineering chapter
Compensation, slit ratio and thin plate support
Reserve Reasonable Cutting Compensation Gap
Reserve a 0.01mm–0.03mm compensation gap for mating structures based on wire electrode diameter to avoid zero-gap discharge interference and ensure precise profile replication
Control Slit Depth-width Ratio
Limit the slit depth-to-width ratio within 10:1. Excessively deep and narrow slits cause unstable wire travel and inconsistent cutting flatness
Reinforce Ultra-thin Plate Structures
Add auxiliary connecting ribs for plates thinner than 0.2mm to prevent bending and displacement caused by wire tension and heat concentration.
EDM / WIRE
What is the difference between Sinker EDM & Wire Cut(WEDM)
First design question
Must the feature stop inside the material, or pass completely through it?
Decision itemWire Cut Machining (WEDM)
Electrode
Continuous molybdenum/copper wire Ø0.10~0.30mm
Alternative: Custom copper or graphite formed electrode
Machining feature
Through holes, outer profile, thin-wall blanking, through contour. Workpiece must be penetrating top to bottom
Alternative: Blind cavity, recess, irregular blind slot & die pocket.Non-through closed shape
Feeding method
Wire moves along XY programmed path through workpiece
Alternative: Vertical Z-axis down feed
Typical application
Sheet blanking, complex 2D outline, precision through holes
Alternative: Mold cavity, irregular blind bore, special countersink
Tolerance
±0.001~0.005 mm (LS-WEDM higher precision)
Alternative: ±0.003~0.01 mm
Surface roughness
Ra 0.2~1.6 μm, superior surface finish
Alternative: Ra 0.8~3.2 μm
WIRE / CUT
Wire Cut Production Process
A through-cut route from threading strategy to contour inspection.
Wire cut traveler
The wire entry and full through-path are planned before the first contour begins.
- 01
Review the through-profile
Confirm that every required contour can be penetrated from top to bottom and identify closed profiles that need threading holes.
- 02
Define datum and wire entry
Set a stable positioning reference, entry point, start hole and cutting sequence for all profiles.
- 03
Program compensation and passes
Apply wire-radius compensation and select high-speed, low-speed or multi-cut parameters for the required accuracy and finish.
- 04
Thread and locate the wire
Pass the electrode wire through the workpiece or prepared entry hole, then align it to the programmed datum.
- 05
Cut and finish the contour
Run the programmed XY path and, where required, complete successive trimming passes to refine accuracy and surface condition.
- 06
Inspect profile and cut surface
Verify contour dimensions, slit width, flatness, thickness capability and exposed surface finish before release.
WHY / CHOOSE
Why Choose Our Wire Cut Machining Service
Wire cut production evidence
±0.001mm
tightest stated wire cut tolerance
0.05mm
minimum cutting width
300mm
maximum cutting thickness
Zero-force spark erosion processing
Adopts wire electrode non-contact cutting technology without mechanical extrusion force, effectively preventing deformation and edge collapse of thin-walled and high-hardness parts.
Ultra-fine micro machining capability
Realizes 0.05mm ultra-narrow slit cutting and zero-radius sharp corner forming, breaking the structural processing limitations of traditional CNC machining.
Hardness-independent processing advantage
Machines all conductive hardened metals and super alloys without tool wear, thoroughly solving hard material precision processing bottlenecks.
Dual-process precision solution
Equipped with high-speed wire cut for cost-effective mass production and low-speed wire cut for ultra-precision mirror finishing to cover all-level precision processing demands.
Full in-house one-stop service
Integrates wire cut machining, surface finishing and precision inspection to simplify procurement procedures and ensure stable batch quality.
Strict quality inspection system
Every batch of parts undergoes full dimensional and surface quality testing, with official inspection reports provided before delivery.
Precision Wire Cut Machining Services | Custom Wire EDM Cutting Parts Статьи
Прежде чем готовить запрос предложения, прочтите последние технические статьи, связанные с этой услугой.
ЧПУ
ЧПУ для сложных металлических корпусов: что должны знать покупатели.
1. Почему ЧПУ-обработка важна для сложных металлических корпусов 2. Что эта деталь говорит о технологическом процессе производства. 3. Ключевые характеристики, которые покупатели должны оценить. 4. Почему литой и обработанный алюминий так распространен? 5. Критерии отбора, которые действительно помогают. 6. Практические предостережения для покупателей 7. Что следует спросить перед оформлением заказа 8. Следующий шаг
pt88801 июл. 2026 г.
ЧПУ
Обработка корпусов из литого алюминия на станках с ЧПУ: на что следует обратить внимание покупателям
1. Почему обработка на станках с ЧПУ важна для корпусов из литого алюминия 2. Для чего предназначена эта деталь? 3. Почему литье под высоким давлением часто сочетается с обработкой на станках с ЧПУ. 4. Ключевые характеристики, которые покупатели должны оценить. 5. Распространенные ошибки при поиске жилья такого типа. 6. Какие вопросы следует задать поставщику перед оформлением заказа? 7. Как это связано с реальными решениями покупателей? 8. Часто задаваемые вопросы: ответы на быстрые вопросы покупателей 9. Следующий шаг
pt88801 июл. 2026 г.
ЧПУ
Обработка на станках с ЧПУ сложных литых корпусных деталей.
1. Почему обработка на станках с ЧПУ важна для сложных литых корпусов. 2. На что покупателям следует обратить внимание в первую очередь 3. Как этапы литья и механической обработки взаимодействуют друг с другом. 4. Распространенные ошибки при закупке корпусов, изготовленных методом механической обработки и литья. 5. Практические рекомендации по выбору персонала для инженерно-технических и закупочных групп. 6. Часто задаваемые вопросы: несколько вопросов, которые обычно задают покупатели. 7. Что делать дальше?
pt88801 июл. 2026 г.
ЧПУ
Обработка на станках с ЧПУ для литых промышленных корпусов: на что следует обратить внимание покупателям
1. Почему ЧПУ-обработка важна при изготовлении литых корпусов и функциональных элементов. 2. Чего пытается достичь этот тип деталей? 3. Краткий вывод для покупателя: что нужно проверить перед утверждением детали. 4. Почему обработка на станках с ЧПУ является критически важным этапом. 5. Критерии проектирования и выбора поставщиков, имеющие наибольшее значение. 6. Распространенные ошибки, которые до сих пор совершают покупатели. 7. Практические вопросы, которые следует задать поставщику. 8. Следующий шаг
pt88801 июл. 2026 г.
What is wire cut machining used for?
Wire cut EDM is a professional non-contact precision cutting process, mainly applied to ultra-narrow slits, sharp corners, complex 2D profiles and high-hardness mold parts that cannot be processed by conventional CNC machining.
What materials can wire cut process?
It adapts to all conductive metals including stainless steel, carbon steel, alloy steel, hardened tool steel, copper, brass and titanium alloy, with processing quality unaffected by material hardness.
What is the minimum cutting width of wire EDM?
We support a minimum cutting slit width of 0.05mm, capable of machining various ultra-fine micro gap and micro groove structures.
Does wire cut processing produce burrs?
No burrs are generated. Spark erosion cutting requires no mechanical cutting, delivering completely burr-free part edges and eliminating secondary deburring processes.
Will wire cut parts deform?
No mechanical cutting force is applied during processing, ensuring zero deformation for thin-plate and thin-walled precision components with high dimensional stability.
What is the tightest tolerance for wire cut?
Low-speed wire cut processing can achieve ultra-high precision up to ±0.001mm, meeting strict matching requirements of high-end molds and precision equipment parts.
Can you customize complex special-shaped parts?
Yes. We provide custom 2D full-profile wire cut services according to customer 2D/3D drawings, covering all kinds of irregular planar structural parts.
Can you support large-batch production?
Yes. Our standardized production line supports stable batch processing with consistent dimensional accuracy and surface quality.
What is your wire cut delivery time?
Prototype orders take 3–5 working days, and mass production takes 10–15 working days, adjusted according to part complexity and order quantity.
Project inquiry
Submit your CAD drawings to obtain professional wire cut machining solutions and accurate quotations.
With complete high-speed and low-speed wire cut equipment and independent in-house finishing capacity, we provide free DFM analysis and one-stop technical consultation for all precision wire EDM projects.